top of page

Brainstorming - what are you missing?

Public·72 members
Najeeb Momoh
Najeeb Momoh

Official Oppo Reno Z PCDT10 Stock Rom


Official Oppo Reno Z PCDT10 Stock Rom




If you are looking for the official stock firmware for your Oppo Reno Z PCDT10 device, you have come to the right place. In this article, we will show you how to download and install the stock ROM on your Oppo Reno Z PCDT10 device using the SP Flash tool. By flashing the stock ROM, you can solve various software issues on your device, such as hang on logo, FRP lock, fastboot mode, display blank or white after flash, dead recovery, dead after flash, etc.




Official Oppo Reno Z PCDT10 Stock Rom



What is Stock ROM?




Stock ROM is essentially firmware that is specific to a particular device. It contains all the necessary files and software that allow the device to operate correctly. Installing a stock ROM can eliminate any software issues you may be facing and restore the machine to its original state.


How to Download and Install Stock ROM on Oppo Reno Z PCDT10?




Before installing the stock ROM on your Oppo Reno Z PCDT10, you should download the firmware file. Then download and install the USB Drivers and flash tool on the PC as well. Once youre done with these, you can proceed to the steps below.



  • Unpack downloaded firmware using 7zip.



  • You will get a scatter firmware file.



  • Install Mediatek Vcom driver on your computer.



  • Disable SLA Authentication by following this guide (if not disabled you will face a BROM error or flash tool require an authorized account/ID).



  • Download and extract smartphone flash tools on your computer from the flash tool folder.



  • Run flash_tool.exe.



  • Set connection like below image (option/connection).



  • Go to Download tab.



  • Click Scatter and load scatter file from ROM folder.



  • Repeat process and load DA and Auth file too from drop down.



  • Select Download only.



  • Click Download.



  • Turn phone OFF, now together press volume up + down key & insert USB, once phone detected immediate release key (make sure your phone stable in device manager).



  • You will see a yellow flashing bar with flashing process.



  • Once done, unplug device and switch it ON.




Download Links:





  • Firmware: [PCDT10_11_OTA_0280 21/5/2020 China]



  • Flash Tools: [SP Flash tool] [ROM2box Full Free]



  • USB Driver: [Mediatek USB Driver]




We hope this article was helpful for you. If you have any questions or suggestions, feel free to leave a comment below.




About

This website is a work in progress and we would love to hear...

Members

  • Iva Merheim-Eyre
  • thanh tran
    thanh tran
  • Kartik Rajput
    Kartik Rajput
  • Putrsa Chola
    Putrsa Chola
  • Princess Princess
    Princess Princess
bottom of page